News

The smooth use of the Instant Print and Apply Machine is indispensable for the maintenance of this device. Regular maintenance and cleaning can extend the service life and reduce the problem of failure of the card. Our Instant Print and Apply Machine equipment is explained.

Note: In addition to regular cleaning, when the medium is found to be faulty, the Glue roller should also be cleaned.

The cleaning steps are as follows:

1.Turn off the printed engine power supply. For personal safety, cleaning work needs to be operated under power off.

2.Then wait for the printed head to cool. The printing work will make the print head temperature very high, which may cause severe burns, so the print head needs to be fully cooled.

3.Remove the medium and ribbon from the print engine.

4.Use wet alcohol without velvet cloth to clean the Glue roller. Pay attention to the rotating roller shaft when cleaning.

5.Re -load the ribbon and medium (if used).

6.Remember to close the media door.

When cleaning the Glue roller, you can also clean up the printed head by the way. Use a cotton swab to dip 90% isopropanol and 10%exfoliating aqueous solution. Wipe it thoroughly from beginning to end to make the solution volatilize.

The above is the step of how the Instant Print and Apply Machine clean up the Glue roller. There are more people who want to know about Instant Print and Apply Machine, or you just need to print the label scheme. You can consult us at any time. We will serve you wholeheartedly.